2016 Ferrara Inferno problems, complaints & recalls
Updated from NHTSA data · How we count
No owner complaints are on file for the 2016 Ferrara Inferno yet. There are 5 recalls for this model year.
- Complaints
- 0
- Recalls
- 5
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Median mileage
- — at time of problem
Key facts
- The 2016 Ferrara Inferno has 5 recalls on file.
2016 Ferrara Inferno recalls (5)
- SUSPENSION:FRONT
Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2019 Inferno fire trucks equipped with independent front suspensions manufactured by Reyco Granning. The front shocks may separate from their upper mount on the front suspension. The loose shock may contact and damage the steering gear housing, possibly causing a steering fluid leak and a loss of power steering assist.
Risk: A loss of hydraulic steering assist can increase the risk of a crash.
Remedy: Ferrara will notify owners and will work with Reyco Granning to inspect and remedy the vehicles free of charge. Ferrara issued owners an interim notification on September 24, 2019. The recall began October 9, 2019. Owners may contact Ferrara customer service at 1-800-443-9006.
- EQUIPMENT
Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2016 Inferno and International 4400, 2013-2016 Igniter, 2014-2017 Cinder and Freightliner M2 106, 2013-2014 Ember and 2013-2017 Kenworth T370 fire-fighting vehicles, equipped with Hale pressure relief valves in the water pumps used for fire fighting. Rings securing the valves may corrode over time after exposure to water, causing the ring to fail and the pressure relief valve to open, reducing the water pressure available for fire fighting.
Risk: A reduction in water pressure may hinder fire fighting efforts, increasing the risk of injury.
Remedy: Ferrara will notify owners, and Ferrara certified dealers or technicians will replace the relief valve retaining ring with one that is stainless steel, free of charge. The recall began on February 12, 2018. Owners may contact Ferrara customer service at 1-800-443-9006.
- POWER TRAIN:MANUAL TRANSMISSION
Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2015-2016 Inferno, Igniter, Intruder and Cinder fire trucks built on Freightliner and International chassis manufactured April 13, 2015, to May 30, 2016. The affected vehicles may be equipped with certain C20 and C21 split-shaft transmissions from Waterous. This transmission sends power to the wheels of an emergency response vehicle or powers an add-on unit such as a water pump used for fighting fires. A component within the shift unit may be damaged and as a result, the operator may not be able to switch the power output.
Risk: If the power output cannot be changed, once the fire truck arrives at the scene, it may not be able to pump water to aid in extinguishing the fire, increasing the risk of injury.
Remedy: Ferrara will notify owners, and the shift unit assembly will be removed and the clevis pin and retaining rings will be replaced, free of charge. The recall began on September 9, 2016. Owners may contact Ferrara customer service at 1-225-567-7100 extension 3011.
- ELECTRICAL SYSTEM
Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2011-2016 Inferno, Igniter, Intruder, and Cinder emergency vehicles manufactured October 3, 2011, to May 31, 2016, equipped with Class 1 Ultraview Touchscreens manufactured by Hale Products. These touchscreens may experience false switch activations that can happen without the operator's knowledge causing accessories to turn on or off, affecting vehicle performance.
Risk: The unintended turning on or off of accessories such as emergency beacons or automatic snow chains can increase the risk of a crash.
Remedy: Ferrara will notify owners, and service personnel or service centers will reprogram the units, free of charge. The recall began on August 26, 2016. Owners may contact Ferrara customer service at 1-225-567-7100 extension 3011.
- EQUIPMENT
Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2015-2016 Inferno, Igniter, Cinder, Ultra, and Intruder vehicles built on Freightliner and International chassis manufactured August 3, 2015, to April 29, 2016, equipped with pumps to provide pressurized water to aid in fighting fires. These pumps have 6" intake strainers that may have been improperly soldered during production and, as a result, the strainers may come apart during use, allowing parts of the strainer and debris to enter the pump, possibly damaging the pump.
Risk: If the strainer and/or debris enters the pump, and the operator is forced to shut down the pump, reducing firefighting effectiveness, there could be an increased risk of injury.
Remedy: Ferrara will notify owners, and owners will check the strainer for missing solder at the joints. Any strainers missing solder will be replaced, free of charge. The recall began on July 20, 2016. Owners may contact Ferrara customer service at 1-800-443-9006 or hale customer service at 1-800-533-3569.
Recent 2016 Ferrara Inferno complaints
Excerpts of the newest owner complaints, lightly cleaned of personal details. Complaints are unverified owner reports.
No narrative complaints on file.
Compare the 2016 Ferrara Inferno with another vehicle →
Other 2016 Ferrara models
Source: U.S. National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation public data, as of Oct 10, 2026. Complaints are submitted by owners and are not verified by NHTSA or by us; a complaint does not prove a defect exists. View this vehicle on NHTSA.gov Methodology