2013 Jeep Wrangler brakes problems

Related recalls

No recalls on file.

What owners say

1. Filed Sep 29, 2026FLBrakes

   ABS Module failed rendering my vehicle inoperable. Lost signal to all speed sensors and swaybar. Vehicle is stuck in limp mode. This is my only transportation. Manufacturer should have recalled this years ago, they know it’s a major problem.

   NHTSA complaint #11767658 · source
2. Filed Sep 26, 2026TXBrakes

   My ABS Module is not working and I’ve been waiting for several months for a new one but two dealers have told me they are not available anymore and my jeep slips and slides out of control when the ground is wet after rain

   NHTSA complaint #11767187 · source
3. Filed Sep 26, 2026TXBrakes

   ABS MODULE FAILURE- Jeep goes into limp mode and replacement parts are no longer manufactured or available to fix. Vehicle is undrivable. This is a known defect affects large number of jeeps. Dash lights on are ABS, downhill assist, check engine light, and more. Attempted to visit local dealer for replacement parts and they have been on back order for several years, attempted to have part repaired and are no longer repairable due to chips not being manufactured. This unit…

   NHTSA complaint #11767101 · source
4. Filed Jul 13, 2026TXBrakes

   The abs module is providing a code and mechanic states it is defective and needs to be replaced. Manufacturer has no parts available for repair. No accident occurred, only way to use vehicle is without abs protected braking.

   NHTSA complaint #11750037 · source
5. Filed Jun 29, 2026FLBrakes

   Had this 2013 Jeep Wrangler since new and has ABS module internal failure code C2200. ABS, ANTI SKID, BRAKE lights are constantly lit on the dashboard. No ABS on this Jeep making it unsafe in an emergency braking situation which could cause a crash. Have tried for over a year and a half to have the ABS repaired or get a new ABS Module. As of today, June 29, 2026, Mopar Parts has again informed us that the ABS Module is unavailable. The Internet has been alive with many Jeep…

   NHTSA complaint #11747157 · source
6. Filed Jun 1, 2026104,494 miTXBrakes

   The ABS module failed in summer 2025. We took the Jeep to the mechanic who was unable to source a new part. The part has been on backorder now for over a year. We cannot get the Jeep inspected because of the break safety issue. The Jeep has no ABS if emergency breaking. Several warning lights are constantly on when operating the Jeep.

   NHTSA complaint #11741237 · source
7. Filed May 19, 2026158,618 miMDBrakes

   2013 Jeep Wrangler. ABS module internal failure code C2200. 3 lights are constantly lit on the dashboard. No ABS on this Jeep, making it unsafe in the rain and snow. No way to have this part repaired anymore, nor does the dealership offer it. Shameful and shocking that MOPAR isn't dealing with this problem. Many, many Jeep owners are dealing with this problem. When will we see a recall??

   NHTSA complaint #11738792 · source
8. Filed May 17, 2026MIBrakes

   C2200 Abs control module internal failure. Anti lock brake, traction control stop working. Vehicle can go into limp mode and not be drivable. Apparently due to safety concerns replacment parts are not produced by the manufacturer. This causing the vehilce to not be driven safely.

   NHTSA complaint #11738389 · source
9. Filed May 6, 2026FLBrakes

   The ABS module has failed. The jeep was not involved in an accident, it is at my house not driveable because Jeep does not have the ABS module. The part has been on factory back order with no date of availability. No aftermarket company produces the past. I now have a jeep that is useless. Jeep should be held accountable for availability of the part.

   NHTSA complaint #11735984 · source
10. Filed Apr 22, 2026GABrakesElectrical System

    I have a 2013 Jeep Wrangler with 180,000 miles. I never off road the vehicle, but after driving on a dirt road, the stability control kicked in during a turn. At the start of the next drive after that, there were 3 lights on the dashboard: brake, ABS, stability control. Connecting the JScan app to the vehicle, the ABS module is completely unresponsive and the vehicle gives a C2200 error code. There were no symptoms of this issue before this event. This vehicle is available…

    NHTSA complaint #11732938 · source
11. Filed Apr 14, 2026FLBrakes

    I have $80,000 in my jeep parked in my garage because the ABS module failed. Error code C2200. I have taken it to three Mechanics; Kap Motor Sports in Palmetto Fl, AFNY, and 4 Wheel Parts in Bradenton Fl. All have run tests coming back with the same error. We have done two Abs bleeds to try and fix the problem. This part should have been recalled years ago. It has been on back order for years and when Firkins Jeep in Bradenton Fl tried to order the part the order was…

    NHTSA complaint #11731092 · source
12. Filed Mar 14, 2026TXBrakes

    The component that failed is the Anti-Lock Braking System (ABS) Control Module in a 2013 Jeep Wrangler. Diagnostic code C2200 (“ABS Control Module Internal Failure”) was retrieved during a scan, indicating an internal electronic failure within the ABS module. The component remains installed in the vehicle and is available for inspection upon request. When the failure occurs, the vehicle’s ABS, traction control, and stability control systems become disabled. The dashboard…

    NHTSA complaint #11724372 · source

Source: U.S. National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation public data. Complaints are submitted by owners and are not verified by NHTSA or by us; a complaint does not prove a defect exists. View this vehicle on NHTSA.gov Methodology