2018 Kenworth T440 problems, complaints & recalls

Updated from NHTSA data · How we count

No owner complaints are on file for the 2018 Kenworth T440 yet. There are 5 recalls for this model year.

Complaints
0
Recalls
5
Crashes
0
Fires
0
Injuries
0
Median mileage
—
at time of problem

Key facts

  • The 2018 Kenworth T440 has 5 recalls on file.
  • NHTSA has opened 1 defect investigation covering this vehicle.

2018 Kenworth T440 recalls (5)

  • Recall 24V145000Feb 23, 2024936 vehicles
    SERVICE BRAKES, AIR:SUPPLY:RESERVOIR/TANK

    PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."

    Risk: Insufficient air volume can reduce braking performance and increase the risk of a crash.

    Remedy: Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 24KWD.

  • Recall 22V277000Apr 25, 202217,641 vehicles
    STEERING:CRITICAL FASTENERS

    PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.

    Risk: Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.

    Remedy: Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.

  • Recall 21V00N000Dec 29, 20211,107 vehicles
    ELECTRICAL SYSTEM:WIRING

    PACCAR Incorporated (PACCAR) is recalling certain 2016-2022 Peterbilt 567, 579, 2021-2022 Peterbilt 536, 2017-2021 Kenworth T880, 2016-2022 Kenworth T680, 2018-2020 Kenworth T440, 2020 Kenworth T270, and 2021 Kenworth T280 vehicles. The methane detection system will not function if the system loses power.

    Risk: The operator may be unaware of a system malfunction or the presence of excessive methane levels, increasing the risk of injury or fire.

    Remedy: Dealers will re-wire the warning alarm, free of charge. Owner notification letters were mailed December 1, 2022. Owners may contact Peterbilt customer service at 1-940-591-4220, and Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 21KWH and 21PBN.

  • Recall 21V391000May 26, 2021612 vehicles
    FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL

    PACCAR Incorporated (PACCAR) is recalling certain 2018-2021 Peterbilt 337, 348, 365, 367, 520, 567, Kenworth T270, T370, T440, T470, T800 and T880 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.

    Risk: A fuel leak in the presence of an ignition source increases the risk of a fire.

    Remedy: Dealers will inspect the rail threads and fuel lines, and replace the rail as necessary, free of charge. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth) or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWC and 21PBD.

  • Recall 18V931000Dec 21, 201825,556 vehicles
    POWER TRAIN:CLUTCH ASSEMBLY

    PACCAR Incorporated (PACCAR) is recalling certain 2018-2019 Peterbilt 337, 348, 365, 367, 389, 567, 579 and 587 trucks and 2018-2019 Kenworth C500, T270, T370, T440, T660, T680, T800, T880 and W900 trucks equipped with automated manual transmissions. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.

    Risk: Unintended movement of a vehicle can increase the risk of a crash.

    Remedy: PACCAR will notify owners, and dealers will update the transmission control module, free of charge. The recall began February 23, 2019. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's numbers for this recall are 18PBE and 18KWH.

NHTSA defect investigations

  • PE20015Opened Sep 21, 2020Closed Oct 14, 2021

    Quarter Fender Failures

    The Office of Defects Investigation (ODI) opened this Preliminary Evaluation (PE21-015) based on one Vehicle Owner Questionnaire (VOQ) and supporting fleet reports. The reports indicated that the subject quarter fenders were prone to cracking and/or separation.After a comprehensive review of the data related to the quarter fender failures on the subject vehicles, ODI did not identify the existence of a safety-related defect trend. Quarter fender failures resulted in a warranty claim rate less than one percent (<1%) of the total vehicle population. All separations, including those due to tread …

Recent 2018 Kenworth T440 complaints

Excerpts of the newest owner complaints, lightly cleaned of personal details. Complaints are unverified owner reports.

No narrative complaints on file.

Compare the 2018 Kenworth T440 with another vehicle →

Other 2018 Kenworth models

Source: U.S. National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation public data, as of Oct 10, 2026. Complaints are submitted by owners and are not verified by NHTSA or by us; a complaint does not prove a defect exists. View this vehicle on NHTSA.gov Methodology