2010 Ford Fusion brakes problems

Related recalls

• Recall 19V904000Dec 18, 2019600,166 vehicles
  SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE

  Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.

  Risk: If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.

  Remedy: Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary. All services will be performed free of charge. The recall began April 1, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S54.

What owners say

1. Filed Sep 22, 2026CTBrakes

   My brakes felt mushy for a couple days. Next day br a ke fluid dash light came on. brake fluid was so low couldn't see it. Went to autozone bought brake fluid .dot 3 per internet. Internet went on to share the fact thi s p r oblem was recalled. I h a v e none open says major safety problem tow xar immediately.im on s t at e assistance i can't pay to fix

   NHTSA complaint #11766161 · source
2. Filed Sep 19, 2026GABrakesSteering

   We have had multiple issues with the ABS and HCU since we bought this car used a couple years ago. We've replaced the ABS Module and HCU and had Ford reprogram it and are still having issues. The brakes go out fully and I went through a red light. The ABS and Traction control and check brake system lights come on. We've spent a couple thousand dollars trying to fix this issue. The brakes have gone out before this incident as well around 95k miles and intermittently since. If…

   NHTSA complaint #11765517 · source
3. Filed Jun 24, 2026TXBrakes

   The ABS Hydraulic Control Unit (HCU) failed internally due to a stuck valve. The component remains on the vehicle and is available for inspection upon request. While braking normally on a public road, the vehicle hit a minor road bump, causing the ABS to momentarily engage. Immediately following the bump, the brake pedal lost all hydraulic resistance and dropped severely to the floorboard. The vehicle experienced an immediate, drastic reduction in stopping power and an…

   NHTSA complaint #11746335 · source
4. Filed Jun 15, 202653,000 miORTowedBrakes

   The contact owns a 2010 Ford Fusion. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed; however, the vehicle failed to stop as intended. The contact depressed the brake pedal to stop the vehicle. Several warning lights were illuminated. The vehicle was taken to the dealer where it was diagnosed with an ABS module failure. The contact was informed that the ABS module needed to be replaced. The vehicle was not repaired. The dealer…

   NHTSA complaint #11744151 · source
5. Filed Apr 21, 2026VABrakes

   My 2010 Ford Fusion has been having issues with the ABS system/module showing the fault code, Service Advance Track System. After checking the recalls on this issue, I learned that Ford did have a recall for this make/model, recall # 19S54, BUT only from cars out of a certain plant during a certain time. I was told by the local Ford dealer as well as Ford Motor Co. that my vehicle was not included even though a recall was released on the same make, model, and year Fusion. I…

   NHTSA complaint #11732625 · source
6. Filed Feb 24, 2026TXBrakes

   The vehicle turns on the traction control and ABS lights, automatically makes a bell sound as a warning, and stops braking, regardless of your speed at that moment.

   NHTSA complaint #11720198 · source
7. Filed Feb 19, 2026CABrakes

   The brakes went almost completely out- having to push the pedal all the way to the floor. All ABS and braking lights illuminated in the dash. There is limited stopping power. The car has become undriveable, even after replacing the HCU and abs system. The dealership has been unable to reprogram the brakes. This exact issue falls under recall 19s54, but Ford claims my problem does not meet the requirements- despite my vehicle having been assembled at the same facility…

   NHTSA complaint #11719061 · source
8. Filed Dec 16, 202590,000 miMIBrakes

   The contact owns a 2010 Ford Fusion. The contact stated while at a red traffic light, the brake pedal was depressed and travelled down to the floorboard. No warning lights were illuminated. The vehicle was taken back to the residence, and a dealer was contacted. The dealer made the contact aware of NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic); however, the VIN was not included. The vehicle was not diagnosed or repaired. The manufacturer was notified of the…

   NHTSA complaint #11705316 · source
9. Filed Dec 6, 2025WYBrakes

   Ford claims no recall but my Hydralic:antilock/traction control/electronic limited slip control unit/module. My petal is sinking. Did an ABS bleed and problem continues. Could this part be in my car and I just haven’t got a recall

   NHTSA complaint #11703476 · source
10. Filed Nov 21, 2025SCCrashBrakesElectrical SystemTransmission & Drivetrain

    Unintended acceleration event. Entered vehicle, put my foot on the brake, cranked it, held in that position while seatbelting. Engine had a VERY loud revving sound. Within seconds vehicle moving backwards on its own. Foot still on the brake, had not touched gas pedal, had not touched gear shifter, and was still sitting straight forward with my foot on the brake and confirmed gear shifter in park. The car quickly accelerated backwards faster and brake pedal had no effect on…

    NHTSA complaint #11700846 · source
11. Filed Nov 21, 2025FLBrakesSteering

    I am reporting a serious safety defect in my vehicle. While driving, the power steering suddenly failed without any warning, resulting in complete loss of steering control. At the same time, the brake warning light, ABS light, and traction control light illuminated, suggesting possible failure of critical braking and stability systems. This incident placed my safety and the safety of others at immediate risk, as the vehicle could not be steered properly and essential safety…

    NHTSA complaint #11700746 · source
12. Filed Nov 18, 2025SCBrakes

    When Applying Brakes the Brake Pedal application of Foot Pressure Travels to the Floor before Slowing the Vehicle. Can the Manufacturer Repair this Safety Problem emmediately ?

    NHTSA complaint #11700229 · source

Source: U.S. National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation public data. Complaints are submitted by owners and are not verified by NHTSA or by us; a complaint does not prove a defect exists. View this vehicle on NHTSA.gov Methodology