2010 Mazda MAZDA6 suspension problems

Related recalls

• Recall 18V631000Sep 14, 201850,176 vehicles
  STRUCTURE · SUSPENSION:FRONT:CONTROL ARM

  Mazda North American Operations (Mazda) is recalling certain 2009-2010 Mazda Mazda6 vehicles sold, or ever registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin and the District of Columbia. The front cross member may corrode after exposure to road salt.

  Risk: Corrosion may weaken the mounting point for the passenger side lower control arm, unexpectedly changing the steering alignment and increasing the risk of a crash.

  Remedy: Mazda will notify owners, and dealers will inspect the cross member and either install a side member and drain hose and apply wax to protect from rust, or install a drain hose and an improved front cross member, free of charge. The recall began March 18, 2019. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 2818I.

What owners say

1. Filed Jun 23, 2026INSuspension

   I recently had my front subframe replaced as part of your recall, however, the rear subframe and all components attached are suffering from the exact same rust and potential component failure as the front. I was replacing my brakes today and noticed that the entire structure is on the verge of complete failure. The right rear suspension already makes unusual noises when going over even small bumps and I imagine if I were to hit a large pothole that would probably be the end…

   NHTSA complaint #11746080 · source
2. Filed Feb 5, 2026NYOther / UnknownSuspension

   I looked up recalls on my vehicle and it states that The 2011 Mazda6 is part of a recall (NHTSA 19V-323, Mazda 2818I) covering 2011-2013 models for front cross member (subframe) corrosion due to insufficient rust protection . In salt-belt states, this corrosion can cause the lower control arm to detach, reducing steering control and increasing crash risk. Key Details regarding the 2011 Mazda6 Subframe Recall: Scope: The recall affects specific 2011-2013 Mazda6 vehicles (and…

   NHTSA complaint #11715942 · source
3. Filed Jul 28, 2024OHSuspension

   2010 mazda 6 i series sedan the entire rear subframe/cradle is rotted along with all the other parts connected to it, the A arm, bumper stops, control arms, rear sway bar the entire rear under carriage. took it to the shop and they said there have been several complaints about this exact issue on several of these cars from 09-13 models. the parts was not painted correctly like the front that was recalled. exposed to all weather elements, the shop wants almost 4k for labor…

   NHTSA complaint #11604971 · source
4. Filed May 7, 2024CTSuspension

   The rear subframe is compromised; it separated from the body of the car. The vehicle is in my driveway and available for inspection should the need arise. The rear end had felt a bit shaky for a month so I took it to my mechanic, who declared the vehicle "unfit for the road" due to the fact that the subframe was rotted away and detached from the car itself. I was told one big bump is an accident waiting to happen...pieces of the car would go flying and I could be left with…

   NHTSA complaint #11587423 · source
5. Filed Feb 7, 2024KYSuspension

   Rear sub frame on car rusting out. Never protected from corrosion or rust. Car is currently in shop. Car has rusted out in the joint just behind drivers rear tire. Received notice of recall on the front of car due to salt and weather conditions front sub frame area replaced . Currently multiple cars have same issues Mazda hasnt fixed or issued any repairs for this

   NHTSA complaint #11570548 · source
6. Filed Oct 9, 2023MASuspension

   My gf went for a basic oil change and the automotive person was shocked to find the rear right cross bar to be suffering from incredible corrosion. He said at this point it is unsafe to drive. We looked into recalls for this make and model and there is one for the front cross bar due to insufficient or improper application of a corrosion spray on the frame. How can they say the front needs to be recalled and not the back? If the dealership didn’t do a good job of covering…

   NHTSA complaint #11549093 · source
7. Filed Aug 14, 2023160,000 miOHBody & StructureSuspension

   The contact owns a 2010 Mazda Mazda6. The contact stated that while driving at an undisclosed speed, the rear frame detached from the vehicle. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 18V631000 (Suspension, Structure) and the contact related the failure to the recall. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was…

   NHTSA complaint #11538412 · source
8. Filed Aug 14, 2023OHSuspension

   The rear frame completely corroded. I was on my way to work this morning and the frame broke due to corrosion. I almost lost my life this morning. According to the recall only the front end was considered faulty. I took the vehicle in for the recall and only the front was looked at and replaced.

   NHTSA complaint #11538302 · source
9. Filed Jul 16, 2023KYSuspension

   I took car to dealership for recall repair (3) one of which was for front sub-frame corrision While it was there thet called Me and said that the rear sub-frame was rausted so bad it was unsafe to drive and that it would cost $4600 to fix it. It seems to Me if You aknowledge a corrision problem in the front then You would accept responsibility for rear. Mazda said that They would have fixed it if the title were not branded ? It was wrecked in the front end and I replaced…

   NHTSA complaint #11532534 · source
10. Filed Jun 13, 2023MNSteeringSuspensionWheels & Tires

    While im driving the steering is shifting to the right and seems lower on right side. My tires daily need to have air in them because of the uneven weight. While I drive and let go of the gas the car pulls back like an E brake could be stuck not sure though. No accidents at all but it seems like the vehicle is getting weaker and weaker with the uneven weight going down on the tires and steering seems like it's going to crash onto the right without being able to control it.

    NHTSA complaint #11526861 · source
11. Filed Apr 3, 2023180,000 miOHCrashTowedBody & StructureSuspension

    The contact owns a 2010 Mazda Mazda6 . The contact stated while driving approximately 25 mph and drove over a bump and lost control of the vehicle and crashed into another vehicle. The contact stated the disc off warning light was illuminated. The contact stated no one was injured nor sought medical attention. A police report was not filed. The vehicle was not drivable. The contact was towed to her residence and then to a local dealer, where it was diagnosed with the rear…

    NHTSA complaint #11515224 · source
12. Filed Jan 31, 2023TNSuspension

    The rear subframe is corroded with rust to the point of about to break into pieces. I did not have control of the vehicle and could not drive above 40mph, sudden pull to one side while braking, loose steering. I could have had a wreck if the subframe would have broke before taking the vehicle in to be inspected by an independent service center. I live over an hour to the nearest Mazda dealership and the car is not drivable. No warning lamps came on and I first noticed the…

    NHTSA complaint #11504756 · source

Source: U.S. National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation public data. Complaints are submitted by owners and are not verified by NHTSA or by us; a complaint does not prove a defect exists. View this vehicle on NHTSA.gov Methodology