2011 Mazda MAZDA3 problems, complaints & recalls

2011 Mazda MAZDA3 recalls (2)

• Recall 17V082000Feb 9, 2017173,859 vehicles
  SEATS

  Mazda North American Operations (Mazda) is recalling certain 2011 Mazda2 and 2010-2011 Mazda3 and Mazdaspeed3 vehicles equipped with a manual seat lifter. In the affected vehicles, the seat height adjustment lifter links may break or detach from the seat frame and the seat angle may incline causing the driver to not be able to maintain an appropriate driving position.

  Risk: If the driver cannot maintain an appropriate driving position, there is an increased risk of a crash.

  Remedy: Mazda will notify owners, and dealers will inspect the seat lifter links and install a reinforcement bracket to the lifter links, or replace the entire seat adjuster unit, free of charge. The recall began April 7, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0917B.

• Recall 16V644000Sep 6, 2016580,455 vehicles
  STRUCTURE:BODY:HATCHBACK/LIFTGATE

  Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.

  Risk: If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.

  Remedy: Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.

NHTSA defect investigations

• EA21002Opened Sep 17, 2021Open

  Desiccated Air Bag Inflator Rupture

  From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.C…

Recent 2011 Mazda MAZDA3 complaints

Excerpts of the newest owner complaints, lightly cleaned of personal details. Complaints are unverified owner reports.

1. Filed Jul 16, 2026167,850 miVAAirbagsSeats & Seat Belts

   The contact owns a 2011 Mazda Mazda3. The contact stated that while operating the vehicle, the front driver’s side seat wobbled and was unsecured. The vehicle was taken to the local dealer, who determined that the front driver’s side seat lifter link was inoperable and needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure, but no assistance was provided. The contact was informed that the VIN was not included in NHTSA Campaign…

   NHTSA complaint #11750889 · source
2. Filed Jan 28, 2026CACrash2 injuredTowedAirbags

   The airbag system failed to deploy during a major accident I was in, where my car rolled multiple times, and the collision that totaled my car. This includes the front airbags, impact sensors, and/or the airbag control module not activating. The vehicle is currently in the possession of the insurance company and can be made available for inspection upon request. During the crash, no airbags deployed, which significantly increased the risk of serious injury or death. The lack…

   NHTSA complaint #11713964 · source
3. Filed Nov 24, 2025ALOther / Unknown

   I was driving it and randomly the AT and TC , and check engine light came on and the car went into limp mode, after doing some research it appears to happen to all 2009-2011 Mazda3's and it's a safety hazard. It's a safety hazard because of when it's stuck in limp mode sometimes if your at a light or something it'll start shifting and if you're not holding the brake completely down it will make the car lurch forward like 2-3 feet more if you don't react fast enough. This is…

   NHTSA complaint #11701203 · source
4. Filed Sep 16, 2025TXOther / Unknown

   The instrument panel above the information display in my 2011 Mazda3 has warped and created a visible gap, which is a known defect previously covered under Mazda’s Special Service Program A9 (SSP A9). While originally described as a cosmetic issue, in my vehicle the gap now allows engine odors and emissions to enter the passenger cabin. This condition presents a safety and health risk to occupants. My daughter drives the vehicle daily to college and is regularly exposed to…

   NHTSA complaint #11687666 · source
5. Filed Aug 16, 2024PAOther / Unknown

   The car is jerking and check engine light is on. Also when you are stopped and press on the gar it takes a bit to get speed. The transmission control module needs to be replaced. There seems to be this issue on many mazda's just not sure why a recall hasn't been done for this case.

   NHTSA complaint #11608963 · source
6. Filed Jan 22, 2024FLEngineSeats & Seat Belts

   Defective Driver's seat construction made by Mazda Mfg Corp. I was the first person to report this cheaply made driver's seat failure to Mazda Corp in Irvine, CA in early 2015 or 2016. Recall was finally issued a year afterwards because Mazda dragged their feet, and only after I threatened to sue them if I was ever in an accident, and the seat was to totally fall apart, and maim me for life did they finally take action. The Recall fix (cheap bandaid clamp that again failed…

   NHTSA complaint #11567016 · source
7. Filed Mar 2, 2023CASeats & Seat Belts

   My seat lifter broke causing the driver's seat to rock back and forth. I brought my vehicle to my local dealer on 05/18/2022 to have an outstanding NHTSA recall 17V-082 performed to repair the issue. I was informed that the necessary part to repair the seat was on backorder and there was no ETA, but that I would be contacted when a part was available. Over the following nine months, I periodically followed up to see if they had received the part, culminating with being told…

   NHTSA complaint #11509936 · source
8. Filed Dec 21, 202280,000 miNDTransmission & Drivetrain

   The contact owns a 2011 Mazda Mazda3. The contact stated while driving at an undisclosed speed, the clutch became inoperable. There were no warning lights illuminated. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was notified but no additional assistance was provided. The failure mileage was approximately 80,000.

   NHTSA complaint #11498447 · source

Compare the 2011 Mazda MAZDA3 with another vehicle →

Source: U.S. National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation public data, as of Oct 10, 2026. Complaints are submitted by owners and are not verified by NHTSA or by us; a complaint does not prove a defect exists. View this vehicle on NHTSA.gov Methodology