2008 Mercury Milan brakes problems

Related recalls

• Recall 19V904000Dec 18, 2019600,166 vehicles
  SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE

  Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.

  Risk: If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.

  Remedy: Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary. All services will be performed free of charge. The recall began April 1, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S54.

What owners say

1. Filed Apr 16, 2025NJBrakesOther / Unknown

   08 merc milan abs did not work and brakes failed almost causing major accidents. I used e brake to stop. Brakes went to floor. Been calling for and dealerships for recalls I find out now about abs malfunctioning noone will fix or get back to me. Leaking brake fluid all around abs module now. Dealerships saying they not fixing abs even on recalls. Ford dealership in East rutherford nj.

   NHTSA complaint #11655118 · source
2. Filed Nov 27, 2023WIBrakes

   The ABS brake function checked out during the recall window on Nov. 2 of 2021. The Ford dealer mechanics purged the brake system with fresh fluid and tested the function. Tested OK. The car was used without issue until recently and now the brake pedal goes down nearly to the floor before the brakes engage. It is shocking at first and once used to that the driver will pump the pedal twice for a firm pedal. A recent visit to a Ford dealer to diagnose the issue revealed that…

   NHTSA complaint #11556992 · source
3. Filed Apr 5, 2023MNBrakesOther / Unknown

   The gas pedal gets stuck at the top when I go to press down on it allowing the car to keep driving when I am trying to stop the car.

   NHTSA complaint #11515561 · source
4. Filed Oct 5, 2022TXBrakes

   Was not able to drive my car because you had to press the breaks all the way to the ground in order for the vehicle to attempt to stop. A recall was issued for the hydraulic breaks in 2019 and no parts were available for almost a year. Car has been at the dealership being repaired since August 12, but now they are telling us that the hydraulic breaks issues has caused the break master cylinder to fail - leaving the car unsafe and undrivable but they are expecting us to pay…

   NHTSA complaint #11488072 · source
5. Filed Jun 6, 202297,000 miMOTowedBrakes

   The contact owns a 2008 Mercury Milan. The contact stated while driving 25-30 MPH, the brake pedal was depressed but went all the way to the floorboard and failed to respond. The contact was unsure whether there was a warning light illuminated. The contact stated that she coasted the vehicle on a hill and turned off the vehicle. There was no warning light illuminated. The vehicle was towed to three different independent mechanics who diagnosed that the braking system had…

   NHTSA complaint #11467781 · source
6. Filed May 29, 2022FLBrakes

   I took the vehicle in earlier this year for the recall on the Brake system. They bled the brakes and said it was fine but now the brakes are just like they were before taking it in. I would assume that the HCU is bad but they did not want to change it out when they had it.

   NHTSA complaint #11466614 · source
7. Filed Feb 1, 2022NDBrakes

   RE: NHTSA Campaign Number: 19V904000 Manufacturer Ford Motor Company Components SERVICE BRAKES, HYDRAULIC Vehicle regarding complaint: 2008 Mercury Milan Vehicle Vin: [XXX] Good day, In September of 2021 I took the above mentioned vehicle in for the above stated recall regarding the Hydraulic control unit. The vehicle was taken to Westlie Motor Company 500 S Broadway Minot, ND 58701 [phone removed]. The vehicle was tested and did in fact fail the test and I was informed the…

   NHTSA complaint #11449698 · source
8. Filed Jan 25, 2022ILBrakes

   For several years, my vehicle has had an issue with "extended brake pedal travel," making it more difficult to come to a stop with a reasonable effort, and increasing the likelihood of an accident. My vehicle has already been repaired for a prior recall regarding "extended brake pedal travel" (this "repair" did not fix this problem; in fact, it apparently passed the Ford-developed test, thus warranting no significant repair. My father is a Ford automotive technician and he…

   NHTSA complaint #11448926 · source
9. Filed Jan 19, 2022139,000 miNYAirbagsBrakes

   The contact owns a 2008 Mercury Milan. The contact stated that he had initially received a recall notice for NHTSA Campaign Number: 17V024000 (Air Bags) and had the vehicle serviced at a dealer. Despite the recall repair, the passenger’s and driver’s side air bag warning lights illuminated. The contact also stated that the ABS warning light was also illuminated on the instrument panel. The contact had yet to experience a brake failure despite the warning light. The contact…

   NHTSA complaint #11448065 · source
10. Filed Oct 1, 202168,000 miCABrakes

    The contact owns a 2008 Mercury Milan. The contact stated the vehicle was repaired under NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic) however, while she was driving 10 MPH, the brake pedal was depressed but felt soft and remained on the floorboard. The contact stated she continued to pump the brake pedal until it became firm. There were no warning lights illuminated. The vehicle was taken to the dealer who diagnosed that the parts used for the recall repair…

    NHTSA complaint #11435167 · source
11. Filed Sep 20, 202153,000 miOHBrakes

    The contact's mother owns a 2008 Mercury Milan. The contact stated that while depressing the brake pedal, the pedal depressed to the floorboard without warning. The contact had initially taken the vehicle to an independent mechanic who informed her that the vehicle was included in NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic). The contact had taken the vehicle to a dealer where the recall repair was performed. Upon return of the vehicle, the contact stated…

    NHTSA complaint #11433584 · source
12. Filed Jul 16, 2021KSBrakes

    The contact owns a 2008 Mercury Milan. The contact received notification of NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and informed the contact that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not…

    NHTSA complaint #11425180 · source

Source: U.S. National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation public data. Complaints are submitted by owners and are not verified by NHTSA or by us; a complaint does not prove a defect exists. View this vehicle on NHTSA.gov Methodology