Latest vehicle recalls
New recall campaigns filed with NHTSA, newest first.
- Holiday House 18RB 2021–2022
- Holiday House 24TB 2021–2022
- Holiday House 27RQ 2021–2022
A gas leak in the presence of an ignition source can increase the risk of a fire.
- XOS RM01 2021
- XOS SA01 2021
- XOS SV05 2021–2022
A brake fluid leak can lead to an increase in stopping distance, increasing the risk of a crash.
A fractured driveshaft can cause a loss of drive power. Additionally, a vehicle rollaway could occur while parked if the parking brake is not engaged. Either of these scenarios increases the risk of a crash.
Tie rod separation can result in a sudden loss of steering, increasing the risk of a crash.
A twisted air bag can deploy improperly, increasing the risk of injury.
An unexpected shut down can result in a sudden loss of drive power, increasing the risk of a crash.
An unexpected shut down can result in a sudden loss of drive power, increasing the risk of a crash.
A corroded dash side harness connector increases the risk of a fire.
- Chevrolet 4500HD 2021–2022
- Chevrolet 4500XD 2021–2022
- Chevrolet 5500HD 2021–2022
- Chevrolet 5500XD 2021–2022
- Chevrolet 6500HD 2022
Broken hex flange lock nuts may cause a loss of tension, leading to steering instability, and increasing the risk of a crash.
An SDM in manufacturing mode will not deploy the vehicle's air bags in a crash, increasing the risk of occupant injury.
Heat exposure may cause the line to leak, increasing the risk of a fire.
- KME Panther 2021
- KME Redundant Panther 2022–2023
- Spartan Fire FC-94 2021–2023
- Spartan Fire Gladiator 2021–2023
- Spartan Fire Metrostar 2021–2023
Tie rod separation can result in a sudden loss of steering, increasing the risk of a crash.
A loss of tension in the steering and suspension joints may lead to steering instability and increase the risk of a crash.
- IC Bus 1300 FBC 2023
- IC Bus CE 2023
- IC Bus Cesb 2023
- IC Bus RE 2023
- IC Bus Resb 2023
- IC Bus TC 2023
A loss of tension in the steering and suspension joints may lead to steering instability and increase the risk of a crash.
Failure of the rearview camera image to display can reduce the driver's rear visibility, increasing the risk of a crash.
An inoperative rearview camera can reduce the driver's rear visibility, increasing the risk of a crash.
An improperly engaged shifter assembly may slip out of the "drive" position, resulting in a sudden loss of drive power, increasing the risk of a crash.
An engine shutdown can cause a loss of drive power, increasing the risk of a crash.
- ATC Toyhauler 2022
An awning that drops or extends beyond normal operation can increase the risk of injury.
An awning extending unintentionally during transit may become a distraction or road hazard, increasing the risk of a crash.
- Genuine Scooter Buddy Kick 2022
A fuel pump failure can cause a loss of drive power, increasing the risk of a crash.
- Audi A6 2019–2022
- Audi A6 Allroad 2020–2022
- Audi A7 2019–2022
- Audi RS 6 Avant 2021–2022
- Audi RS 7 2021–2022
- Audi S6 2020–2022
A gateway control module shutdown will suddenly reduce engine power, increasing the risk of a crash.
Emergency response may be delayed without the vehicle location information, increasing the risk of injury.
A fuel leak in the presence of an ignition source such as hot engine or exhaust components, can increase the risk of a fire.
The jump seat may fall without the safety clip, increasing the risk of injury.
A loose retaining nut may allow the bumper to detach, becoming a road hazard and increasing the risk of a crash.
Unintentional engagement of the parking brake increases the risk of a crash.
An incorrect label may lead to unintentionally overloading the vehicle, increasing the risk of a crash.
The inability to shift modes may delay emergency response, increasing the risk of injury.
Overheated components can increase the risk of a fire.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation public data. Complaints are submitted by owners and are not verified by NHTSA or by us; a complaint does not prove a defect exists. Methodology